Sisteme de cofraje
 

MEP

 

Eşafodajul

Domenii de utilizare Caracteristici / Avantaje Lista de produse
 

Înălţimi mari, sarcini mari

Eşafodajul MEP este un sistem versatil, pentru toate tipurile de cofraje pentru planşee: fără număr mare de popi, ci aceleaşi număr redus de piese similare împreună cu avantajele sistemului SAS de detensionare rapidă conceput de MEVA.
Eşafodajul poate fi adaptat cu ajutorul diferitor rame, în funcţie de suprafaţa de suport şi de capacitatea de încărcare.

Datorită flexibilităţii sale privind adaptarea la înălţime, sistemul se pretează în special la:

  • sprijinirea cofrajului de planşee, indiferent de înălţime
  • mese cofrante în cazul suprafeţelor mari de planşee
  • susţinere grinzi, planşee în consolă sau prefabricate

Sistemul este completat cu popul de capacitate portantă ridicată MEP HD (sarcină triplă) lăcuit la cald.

Sistemul de detensionare rapidă SAS
 

  • principiu consacrat de reglare, montare grosieră prin introducerea unui ştecăr, ajustare fină cu ajutorul unei piuliţe de poziţionare
  • detensionare la fiecare lovitură de ciocan
  • repunerea automată în poziţia iniţială conferă o siguranţă de funcţionare de 100% chiar la decofrare


 

Concept

CARACTERISTICI

AVANTAJE

  • toate înălţimile de planşee între 1,85 m şi până peste 21,00 m pot fi cofrate cu numai două tipuri de popi
  1. montare uşoară
  • număr mic de componente de bază: pop, prelungire şi ramă
  1. management clar şi o bună optimizare a stocurilor

Montare şi demontare

CARACTERISTICI

AVANTAJE

  • principiu consacrat de reglare:  montare grosieră prin introducerea unui ştecăr, ajustare fină cu ajutorul piuliţei robuste de reglare poziţionate pe filetul exterior conform cerinţelor de pe şantier
  1. fără înfiletare interminabilă
  2. introducerea rapidă a popilor, de ex. pentru  deplasarea cu căruciorul de transport sub grinzi înalte
  • Invenţia MEVA: sistemul de detensionare rapidă SAS eliberează popul MEP de sarcină la o lovitură de ciocan
  1. filetul nu este folosit sub sarcină
  2. materialul este protejat, efortul este minim
  • Înălţare diferenţiată prin ţeavă interioară, ajustabilă separat la fiecare pop
  1. pragurile şi denivelările suprafeţei suport sunt compensate simplu
  • racordul ramelor de rigidizare la popul MEP se realizează printr-un dispozitiv de închidere rapidă şi se efectuează cu şuruburi cu cap ciocan
  1. îmbinare sigură, vizibilă imediat prin intermediul elementului de închidere în poziţie transversală
  • contravântuiri reglabile, pentru orice distanţă între popi, între 90–300 cm
  1. ajustare simplă la orice dimensiune specială
  • o cuplă ţeavă MEP poate fi fixată oriunde pe profil
  1. ţevile de schelă cu Ø 48 mm pot fi fixate fără probleme în orice loc
  • montarea platformelor cu sistem automat de asigurare
  1. desfăşurarea activităţii în siguranţă la orice înălţime, cu adaptare în funcţie de necesitate
  • cărucior de transport pentru mutarea de unităţi complete de eşafodaj
  1. eşafodajul poate fi transportat fără macara
Deschide detalii
Închide toate detaliile
 

MEP-prop with SAS

MEP-prop with SASZoom
The MEP-prop is a combination of steel inner tube and aluminium outer tube with T-groove to attach reinforcing frames. The SAS quick-lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to the European Standard EN 1065 (class E) the props have a load capacity of: MEP 300: 40 kN irrespective of assembly position. MEP 450: 20 kN irrespective of the assembly position, if assembled with the inner tube downwards the load capacity increases to 30 kN. Depending on their application the load capacity varies (refer to Technical Manual for MevaDec).

MEP-frame

MEP-frameZoom
aluminium, reinforcing frame to build towers with MEP-props. It is attached to the aluminium outer tube of MEP-props or -extensions with the integrated hammerhead screw (quick connector):

Extension piece MEP

Extension piece MEPZoom
aluminium profile (same as outer tube of MEP-props) with two foot plates to extend shoring towers: one (1) MEP-plug connector and two (2) pins 14/135 are required.

Basic prop 360 MEP-HD

Basic prop 360 MEP-HDZoom
aluminum profile, coated red, combined with spindle MDP-HD as a single prop, compatible with MEP shoring tower.

Spindle MEP-HD

Spindle MEP-HDZoom
galvanised, attached to and roughly aligned on the basic prop MEP-HD with a clip,fine adjustment via lock nut. Adjustment range: 0 - 40 cm, spindle 140: 0 - 100 cm. Spindle and basic prop MEP HD make up MEP HD single prop with load capacity of 120 kN.

Plug connector MEP

Plug connector MEPZoom
galvanized, to connect MEP-extensions to MEP-props or other extensions. Together with two (2)pins 14/135 plug connectors provide a rigid connection.

Pin

PinZoom
galvanized, to attach MEP-forked prop heads, pluggable MD-drop heads and pluggable MD-prop heads to MEP-props (14/90, if connected to steel inner tube) and, in conjunction with the MEP-plug connector to connect MEP-extensions to MEP-props or other extensions (14/135, if connected to aluminium outer tube).

Spindle MEP

Spindle MEPZoom
galvanized, steel spindle, coarse adjustment with G-hook, precise adjustment with adjusting nut on outer tube. MEP- spindles can be bolted to the outer tubes of all MEP-props and MEP-extensions by using four (4) bolts M16x40 (to be ordered separately). It provides 28-80 cm additional adjustment (35-80 cm when used with forked prop head).

Calotte support MEP

Calotte support MEPZoom
galvanized, inclination 5°, is used as foot plate for MEP-props and MEP-spindles to allow for perpendicular load transfer on sloped surfaces.

Folding part MEP

Folding part MEPZoom
galvanized, it allows hinging of legs so that MEP-towers may be moved out of buildings (by using C-hooks) with proper clearance underneath spandrel beams or over parapets.

Forked prop head MEP

Forked prop head MEPZoom
galvanized, with Dywidag-thread (15 mm) to clamp the stringers (steel or wood) to the prop head. The forked prop head can be attached to the inner tube of MEP-props with pins 14/90 or to the aluminium outer tube with pins 14/135.

Diagonal cross-brace MEP

Diagonal cross-brace MEPZoom
galvanized, adjustable cross-brace made of steel tubes, bracing accessory used in case of varying prop spacings. The dimensions, e.g. 170/90 stand for the maximum and minimum prop spacing.

Tube coupler DK 48 MEP

Tube coupler DK 48 MEPZoom
galvanized, is attached to the aluminium outer tube of MEP-props or -extensions (SW 22/SW 24) to permit connection of scaffold tubes of Ø 48 mm.

MEP-connector for push-pull props

MEP-connector for push-pull propsZoom
aluminium, to attach push-pull props to the aluminium outer tubes of MEP-props or MEP-extensions.

Prop connector

Prop connectorZoom
galvanized, with Dywidag-thread Ø 15 mm. To attach props for horizontal bracing, e.g. of single-sided formwork. Length of thread approx. 20 cm.

Lift truck MEP

Lift truck MEPZoom
galvanized, to lift and move shoring towers and slab tables. Height 2,12 m, load capacity 500 kg, adjustable range 0,62 m to 1,96 m. It is positioned below the MEP-frames. Always two (2) lift trucks are required to move tabels. Please observe Instruction Manual.

Transport waler MEP

Transport waler MEPZoom
coated, to move MEP-shoring towers. L = 2,4 m, max. load capacity 30 kN (3 t). The pre-assembled plug-connectors can be adjusted to MEP-frames 55, 110, 170 and 220. The number of the required walers is determined by the size of the shoring tower. Please observe Instruction Manual.

Crane hanger MEP

Crane hanger MEPZoom
galvanized, with Dywidag-thread Ø 15 mm, to move slab tables. Load capacity 10 kN (1 t). Always four (4) crane hangers are required to facilitate the transport. Length of thread 52 cm. A flange nut 100 has to be ordered separately.

Flange nut 100

Flange nut 100Zoom
forged, cut thread, for Dywidag tie rods with diameter 15 mm, diameter of plate 100 mm, SW 27, admissible load capacity 90 kN (DIN 18216).

Accessories for attaching

Accessories for attaching
to attach MD-drop heads or MEP-spindles to MEP-props or MEP-extension pieces (not shown).

MEP-scaffold platforms

MEP-scaffold platformsZoom
Aluminium frame with wooden planks and access hatch, self-locking. Harmonized with the dimensions of the MEP shoring system to allow for working platforms in great heights, e.g. for the application of MevaDec.

Scaffold platform with access hatch

Scaffold platform with access hatchZoom
Aluminium frame with wooden planks and access hatch, without ladder, self-locking. Harmonized with the dimensions of the MEP shoring system to allow for working platforms in great heights, e.g. for the application of MevaDec. MEP-scaffold platforms 170/33 are used as supplement.

MEP-ladder for hatchway

MEP-ladder for hatchwayZoom
aluminium, for MEP-scaffold platforms: Length 2.95 m.
 
 
Termeni Tipărire
 © MEVA Schalungs-Systeme GmbH