Sisteme de cofraje
 

SDT

 

Cofrajul pentru planşee - mese cofrante

Domenii de utilizare Caracteristici / Avantaje Lista de produse
 

Ideal pentru suprafeţe mari şi identice de planşeu

Dacă proiectul prevede faţade deschise, mai multe etaje şi etape de montaj asemănătoare, există posibilitatea de a economisi timp şi bani utilizând mese cofrante pe suprafeţe mari.

Pentru accelerarea activităţilor de construcţie, în cazul faţadelor deschise de construcţii, avantajul meselor cofrante de margine este următorul: cofrajul de margine, platformele şi dispozitivele de siguranţă sunt integrate şi pot fi mutate cu o singură manevră de macara. Toate combinaţiile cu alte metode de cofraj planşee (MevaDec, MevaFlex şi planşee cu predale) cât şi zonele de completare şi compensările pot fi realizate fără probleme.

Mesele cofrante se pretează întotdeauna pentru:

  • număr mare de utilizări
  • clădiri cu faţade deschise
  • planuri ce nu se modifică de la etaj la etaj

Din combinaţia între mesele cofrante cu dimensiuni standard (SDT) şi mesele cofrante cu dimensiuni speciale specifice proiectului (PDT), rezultă o soluţie eficientă din punct de vedere al timpului de lucru şi costurilor implicate. 

Execuţie

CARACTERISTICI

AVANTAJE

  • mese cofrante standard (SDT) - patru dimensiuni: 250 x 400 cm, 200 x 400 cm, 250 x 500 cm şi 200 x 500 cm, toate cu foaie cofrantă alkus
  1. unitate preasamblată pentru betonare pe suprafeţe mari, logistică simplificată de şantier, deplasare extrem de rapidă
  • mese cofrante cu dimensiuni speciale conform proiectului (PDT) ce oferă posibilitatea de a alege forma şi mărimea dorite
  1. secţiune individuală pe planul clădirii cu suprafaţă de completare minimă, fără soluţii la faţa locului, extrem de eficient la utilizarea pentru planuri de aceeaşi formă

Construcţie

 CARACTERISTICI

AVANTAJE

  • preasamblate, din patru componente principale, constând din cap rabatabil pentru popi, grinzi H20 şi foaie cofrantă
  1. logistică scăzută a componentelor
  2. uşor de montat pe şantier, trebuie amplasaţi numai popii
  • cap rabatabil pentru popi cu funcţie de rabatare integrată
  1. rabatarea popilor pentru transportul peste parapeţi şi pentru depozitare provizorie, cu utilizarea unui spaţiu restrâns
  • asamblare stabilă cu protecţie laterală încorporată drept masă de cofraj margine, accesibilă de la început
  1. siguranţă maximă pe şantier, încă de la fixare

Cofrare şi decofrare

CARACTERISTICI

AVANTAJE
  • cofrare şi decofrare ca unitate completă sub planşeu cu căruciorul de transport, per etaj, prin traversă de transport, cu macaraua
  1. transportul unor unităţi de dimensiuni mari, fără depozitarea provizorie a cofrajului
  2. utilizarea cofrajului, cu implicarea unui număr mic de personal, asamblarea simplă şi optimizată reduce greşelile de utilizare
  • număr mic de popi per masă de cofraj de planşeu
  1. intervale scurte de montare a popilor
  2. îndreptare şi nivelare simplă
Deschide detalii
Închide toate detaliile
 

Large-size slab tables

Large-size slab tablesZoom
Pre-assembled large-size slab tables made of H20-girders, available in different dimensions for slab thicknesses up to 50 cm. The stringers consist of two (2) H20-girders and two (2) folding prop heads to attach the props. Available with factory-assembled all-plastic forming face alkus AL 21 or as base structure for job-built facing.

Folding prop head SKK

Folding prop head SKKZoom
galvanized, height 28 cm, max. load capacity 40 kN. To fold up props (Ø 48-76 mm) when flying slab tables out of a building by using a transport spreader (C-hook).

Safety clamp H20/30

Safety clamp H20/30Zoom
galvanized, with Dywidag-thread Ø 15 mm. To connect stringers and joists, a brace tube and a flange nut 100 are required. Length of thread 30 cm.

Brace tube

Brace tubeZoom
galvanized, rectangular tube 60/40, length 28 cm. To connect stringers and joists of slab tables, a safety clamp H20/30 and a flange nut 100 are required.

Flange nut 100

Flange nut 100Zoom
forged, cut thread, for Dywidag tie rods with diameter 15 mm, diameter of plate 100 mm, SW 27, admissible load capacity 90 kN (DIN 18216).

SKK-intermediate prop head

SKK-intermediate prop headZoom
galvanized, for intermediate support of slab tables with 6 or 8 legs, admissible load capacity 50 kN for symmetrical load transmission. Attachment to props (MD,ME) with pin 14/90 or with pin 14/135 to the aluminium outer tube of MEP-props.

alkus plastic sheet AL 21

alkus plastic sheet AL 21Zoom
all-plastic sheet - nailable and repairable. Durable forming face without swelling or shrinking, loose sheets for various applications.

Plywood 3S

Plywood 3SZoom
three-layer plywood forming face, 21 mm, with resistant coating on both sides. Good pore structure of the concrete due to absorbent surface.

Trestle for beams 40/30

Trestle for beams 40/30Zoom
galvanized, is used as formwork for concrete beams or for stop ends at slab edges.

Formwork girder H20

Formwork girder H20Zoom
robust, all-purpose girder for different tasks. High load-bearing capacity with only low weight, approved by building authorities, adm. Q = 11 kN, adm. M = 5 kNm.

MD-prop

MD-propZoom
galvanized, complying with the European standard EN 1065 (class E). The adm. load capacity is 20 kN at all extensions. Depending on their application with MEVA systems the load capacity varies .

ME-prop

ME-propZoom
galvanized, complying with the European standard EN 1065 (class E). The adm. load capacity is 30 kN at all extensions. Depending on their application with MEVA systems the load capacity varies .

MEP-prop with SAS

MEP-prop with SASZoom
The MEP-prop is a combination of steel inner tube and aluminium outer tube with T-groove to attach reinforcing frames. The SAS quick-lowering system allows the stress in the prop to be released with one strike of a hammer. After stripping the prop automatically resets and locks in the original position. According to the European Standard EN 1065 (class E) the props have a load capacity of: MEP 300: 40 kN independent from the assembly position. MEP 450: 20 kN independent from the assembly position, if assembled with the inner tube downwards the load capacity increases to 30 kN. Depending on their application the load capacity varies (refer to Technical Instruction Manual for MevaDec).

Tripod

TripodZoom
galvanized, auxiliary to stabilize props of Ø 48 mm to Ø 80 mm. The revolving legs of the tripod allow using it right in the middle of a room as well as along the wall or in a corner. It is attached to the aluminium profile of MEP-props by means of a MD-safety claw.

MEP-frame

MEP-frameZoom
aluminium, reinforcing frame to build towers with MEP-props. It is attached to the aluminium outer tube of MEP-props or -extensions with the integrated hammerhead screw (quick connector).

Beam clamp 8

Beam clamp 8
to clamp stringers to joists, suited for wooden girders H 20 (not shown).

Pins

PinsZoom
galvanized, to attach the SKK-intermediate prop head to props. The pin 14/90 is used if connected to steel tubes (up to Ø 63 mm), the pin 14/135, if connected to aluminium outer tube of MEP-props or -extensions.

Tensioning chain 8/2500 (5 kN)

Tensioning chain 8/2500 (5 kN)
galvanized, to secure the slab formwork at slab edges and on cantilevering beams. Two (2) tensioning chains and one (1) coupling unit are required. Ø 8 mm, length 2,50 m, load capacity 5 kN. Attention: These chains must not be used as lifting devices (not shown).

Coupling unit M 16

Coupling unit M 16
galvanized, is used with the tensioning chain 8/2500, one side with hook, one side with safety eye (not shown).

Railing clamp

Railing clampZoom
coated, can be clamped to all kind of beams or free slab edges. Railing height 100, h = 100 cm, clamping length 45 cm. Railing height 140, h = 140 cm, clamping length 50 cm.

Guard-railing post

Guard-railing postZoom
galvanized, is attached to the support for guard-railing post SDT.

Support for guard-railing post SDT

Support for guard-railing post SDTZoom
galvanized, is attached to the web of H20-girders, incl. scews. It is used to build a guard-railing/front-railing, guard-railing posts 100 or 140 are required in addition.

Z-connector 40

Z-connector 40Zoom
galvanized, to connect H20-stringers to H20-joists (flange height 40 mm). We recommend to use double-headed nails.

Transport spreader 250/540 (C-hook)

Transport spreader 250/540 (C-hook)Zoom
galvanized, foldable, max. load capacity 10 kN (1 t). To move slab tables by crane. Adjustment length 3,25-5,00 m, adjustment width 0,50-2,00 m. Please observe Instruction Manual.

Transport carriage

Transport carriageZoom
coated, max. load capacity 10 kN (1 t). Permits the horizontal transport and precise adjusting of slab tables. When the carriage is at crosswise position, openings of 90 cm can be passed. Application range 1,45-3,20 m.

Extension 100 for transport carriage

Extension 100 for transport carriageZoom
coated, max. load capacity 10 kN (1 t). To extend the transport carriage by 1,00 m, always two (2) extensions per carriage required. Application range from 2,45-4,20 m. Delivery includes assembly accessories.

Rope loop

Rope loopZoom
Round strand cable 2 mm, PVC-coated, with O-ring and snap hook. To secure the fold-up props at the wooden girders.
 
 
Termeni Tipărire
 © MEVA Schalungs-Systeme GmbH