Sisteme de cofraje
 

StarTec-Securit

 

Cofrajul pentru diafragme

Siguranţa pe primul loc

StarTec-Securit este cofrajul de diafragmă StarTec consacrat, îmbunătăţit cu platforma de betonare Securit. Platforma rabatabilă rămâne pe panou după montaj şi poate fi utilizată direct din stivă: rabatarea parapetului şi a platformei de betonare, fixarea scării, montarea popilor de aliniere – şi deja se poate cofra. Elemente, ca de exemplu o scară conectată la sistem, pe care se urcă cu spatele la cofraj, o trapă de acces cu închidere automată şi un parapet frontal care se montează la sol, sporesc siguranţa.

Utilizând StarTec-Securit aveţi toate avantajele sistemului de cofrare de diafragmă StarTec şi în combinaţie cu platforma de betonare Securit.

Siguranţa constituie un factor important pe toate şantierele. De aceea, producătorii au întotdeauna în vedere asigurarea unei siguranţe maxime. Scopul este acela de a concepe componentele în aşa fel, încât să se asigure siguranţa utilizatorilor şi în acelaşi timp să crească randamentul muncii prin îmbunătăţirea condiţiilor. În Franţa, acest standard de siguranţă pentru locurile de muncă în domeniul betonării este în vigoare de mulţi ani.

Execuţie

 CARACTERISTICI

AVANTAJE

  • StarTec-Securit este livrat preasamblat pe şantier
  1. poate fi utilizat direct din stivă
  2. fără montaj de bază costisitor
  3. toate componentele relevante din punct de vedere al siguranţei sunt integrate
  • platformă de betonare cu suport de parapet, parapeţi laterali, parapeţi frontali,  trapă de acces cu scară
  1. siguranţă de la început
  • platformă de betonare Securit disponibilă şi nemontată
  1. reechiparea cofrajului StarTec este posibilă în orice moment
 

Construcţie

 CARACTERISTICI

AVANTAJE

  • înălţimi mici de transport – sub 30 cm
  1. mai multe elemente per transport, costuri de transport mai mici
  • popi aliniere cu tensori dubli (popi aliniere SRL)
  1. poziţionare în siguranţă maximă şi în cazul  supraînălţării
  • trapă de acces cu siguranţă automată
  1. închidere automată şi evitarea accidentelor
  • panoul StarTec 270/240 complet utilat, cu StarTec-Securit, cântăreşte mai puţin de 700 kg
  1. greutate mai mică cu 30 % decât cofrajele obişnuite; deplasare pe suprafeţe mari cu ajutorul dispozitivelor de ridicare de pe şantier
  • platformă spaţioasă, cu lăţime de 90 cm
  1. betonare şi cu utilizarea unor bene mari de betonare
  • parapet lateral rabatabil şi extensibil
  1. siguranţă maximă la montaj şi betonare
  • parapet frontal pe latura învelişului de cofraj
  1. siguranţă maximă la asamblarea pe o latură platformei
 
 

ST-Securit 270/... AL20 with hatch

ST-Securit 270/... AL20 with hatchZoom
ST-panel 270/240 (270/135) with mounted SST-access platform 240 (135) with hatch, foldable. Includes access hatch, guard-railing, side railings, ladder, accessories for attaching and prop-connectors. Brace frames need to be ordered separately. Attention: To stack ST-Securit-panels for height extension always two (2) braces SRL 120 (+ head bolt 16/90 and cotter pin 4) are required in addition.

ST-Securit 270/... AL20

ST-Securit 270/... AL20Zoom
ST-panel 270/240 (270/135) with mounted SST-access platform 240 (135) without hatch, foldable. Includes guard-railing, side railings, accessories for attaching and prop-connectors. Brace frames need to be ordered separately. The access hatch is bolted and can be refitted with a ladder. Attention: To stack ST-Securit-panels for height extension always two (2) braces SRL 120 (+ head bolt 16/90 and cotter pin 4) are required in addition.

ST-Securit 135/... AL20

ST-Securit 135/... AL20Zoom
ST-extension panel 135/240 (135/135) with mounted SST-access platform 240 (135) without hatch, foldable. Includes guard-railing, side railings, accessories for attaching and prop-connectors. Brace frames need to be ordered separately. Attention: always two (2) braces SRL 120 (+ head bolt 16/90 and cotter pin 4) are required in addition.

SST-access platform with hatch

SST-access platform with hatchZoom
galvanized, foldable access platform with hatch which remains at the ST-panels 270/240 or 270/135, including guard-railing, hatch, ladder, side railings (left and right), accessories for attachment and connectors for push-pull props.

SST-access platform

SST-access platformZoom
galvanized, foldable access platform without hatch, which remains at the ST-panels 270/240 or 270/135, including guard-railing, side railings (left and right), accessories for attachment and connectors for push-pull props

SST-secondary platform

SST-secondary platformZoom
foldable access platform without hatch, remains at ST-panel 135/240 (135/135), includes guard-railing, side railings, accessories for attaching and prop connectors, access hatch is bolted. Platform can be refitted to a platform 240 (135) with hatch by replacing the connecting bars.

AS-assembly lock

AS-assembly lockZoom
galvanized, to tightly connect and align AluStar- and StarTec-panels. Clamping length 8 cm. Two (2) AS-assembly locks are required per panel joint.

Uni-assembly lock

Uni-assembly lockZoom
galvanized, for stepless compensations, clamping length 22 cm or 28 cm.

Flange screw

Flange screwZoom
galvanized, with Dywidag thread Ø 15 mm. To attach accessories (e.g. alignment rails, brace frames, push-pull props, etc.). Length of thread 18 cm (28 cm).

Securit stacking clamp ST

Securit stacking clamp STZoom
galvanized, when stacking two panels ST-Securit 270/240 two clamps are required, when extending height with a panel 135/240 one clamp is sufficient to stabilize the unit. The clamps are always applied in addition to AS/ST-assembly locks. Clamping length 10,5 cm.

Alignment rail 90

Alignment rail 90Zoom
galvanized, to brace panel joints of stacked ST-Securit-panels in order to erect and lay down the units. Two (2) alignment rails and four (4) flange screws 18 are required per stacked panel.

SST-front railing

SST-front railingZoom
galvanized, is attached to StarTec panels 270/240 or 135/240 (facing side), can remain at the panel after assembly. Three possible heights: retracted, half extended, fully extended (approx. 1,00 m).

SST-brace frame

SST-brace frameZoom
galvanized, without formwork-prop connectors. To align and brace StarTec-Securit formwork. It consists of a brace SRL at the top (SRL 245 or SRL 120) and a rigid strut or brace SRL 120 plus foot plate 60 at the bottom. The required connection devices are delivered with the StarTec-Securit-panels

Push-pull prop R

Push-pull prop RZoom
galvanized, guaranteeing tensile and compression strength. They serve to align and brace wall formwork. Foot plates and formwork-prop-connectors have to be ordered separately.

Braces SRL

Braces SRLZoom
galvanized, guaranteeing tensile and compression strength. They consist of a right-hand and a left-hand spindle as well as a revolving centre part and serve to align and brace wall formwork. Foot plates and formwork-prop-connectors have to be ordered separately.

Securit rigid strut

Securit rigid strutZoom
galvanized, rigid, not adjustable, forms part of the SST-brace frame and replaces the bottom brace SRL 120.

Foot plate 60

Foot plate 60Zoom
galvanized, incl. two (2) head bolts 16/90 with cotter pin 4. Double-jointed foot plate of SST-brace frame, can also be used to attach other braces and push-pull props up to Ø 58mm. The foot plate can be bolted to any kind of job-built concrete block (ballast).

Head bolt 16/90

Head bolt 16/90Zoom
galvanized, to attach push-pull props or braces to foot plates and formwork-prop connectors.

Cotter pin D=4

Cotter pin D=4Zoom
galvanized, to lock the head bolt.

Securit lifing bar ST

Securit lifing bar STZoom
galvanized, to lift the formwork from the ground without damaging the guard-railing. Load capacity: perpendicular = 11 kN (1.1 t), horizontal = 6.6 kN (660kg). Always use to lifting bars per gang.

AS-crane hook

AS-crane hookZoom
to move panels. Self-locking, load capacity 15 kN (1.5 t). Always two (2) crane hooks required per gang.

Crane slings

Crane slingsZoom
Four (4) polyester ropes, length 5m, with 60cm lifting chain and four (4) lifting hooks, max. load capacity 20 kN (2 t), to load and unload trucks and to move panel stacks near the ground.

Lifting hook

Lifting hookZoom
galvanized, with these lifting hooks any 4-roped crane slings available on site can be used to move the panel stacks (always use 4 hooks at a time). Max. load capacity 10 kN (1 t) per lifting hook, max. weight of a panel stack 2 tons.
 
 
 © MEVA Schalungs-Systeme GmbH