Sisteme de cofraje
 

R / SRL

 

Popi de aliniere

Domenii de utilizare Caracteristici / Avantaje Lista de produse
 

Popii de aliniere R

zincaţi, rezistenţi la tracţiune şi presiune. Servesc la îndreptarea şi susţinerea cofrajelor pentru diafragme. Talpa pop şi piesele de racordare vor fi comandate separat.

Popii SRL

incaţi, rezistenţi la tracţiune şi presiune. Sunt compuşi dintr-o tijă filetată de dreapta şi una de stânga, cât şi dintr-o componentă rotativă poziţionată în mijloc. Servesc la îndreptarea şi susţinerea cofrajelor pentru diafragme. Talpa pop şi piesele de racordare vor fi comandate separat.

Find out more about the push-pull props options in the product list.

Deschide detalii
Închide toate detaliile
 

Push-pull props R

Push-pull props RZoom
galvanized, guaranteeing tensile and compression strength. They serve to align and brace wall formwork. Foot plates and formwork-prop-connectors have to be ordered separately.

Braces SRL

Braces SRLZoom
galvanized, guaranteeing tensile and compression strength. They consist of a right-hand and a left-hand spindle as well as a revolving centre part and serve to align and brace wall formwork. Foot plates and formwork-prop-connectors have to be ordered separately.

Brace frame 250

Brace frame 250Zoom
galvanized, to align and brace the formwork. Available with or without formwork-prop connector, it consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate, the formwork-prop connectors are attached to the formwork with flange screws 18.

SST-brace frame

SST-brace frameZoom
galvanized, without formwork-prop connectors. To align and brace StarTec-Securit formwork. It consists of a brace SRL at the top (SRL 245 or SRL 120) and a rigid strut or brace SRL 120 plus foot plate 60 at the bottom. The required connection devices are delivered with the StarTec-Securit-panels.

Formwork-prop connector

Formwork-prop connectorZoom
galvanized, to connect braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile by means of a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.

Flange screw

Flange screwZoom
galvanized, with Dywidag thread Ø 15 mm. To attach accessories (e.g. alignment rails, brace frames, push-pull props, etc.). Length of thread 18 cm (28 cm).

E-assembly lock with coupling

E-assembly lock with couplingZoom
galvanized, to attach push-pull props at the panel joints of the wall formwork systems AluFix and EcoAs. Clamping length 4.6 cm.

Combi-lock with coupling

Combi-lock with couplingZoom
galvanized, to attach push-pull props at the panel joints of the wall formwork systems AluStar, StarTec, Mammut and Mammut 350. Clamping length 8, 10 and 12 cm.

Universal joint connector 76/135

Universal joint connector 76/135Zoom
galvanized, to attach push-pull props to vertical or horizontal panel joints (incl. head bolt 16/90 and cotter pin 4). A Combi-lock with coupling is additionally required. Typical application in folding shaft formwork.

Reversible coupling for push-pull props

Reversible coupling for push-pull propsZoom
galvanized, to connect push-pull props or braces to vertical alignment rails, a flange nut is additionally required.

Articulated foot plate

Articulated foot plateZoom
galvanized, incl. head bolt 16/90 and cotter pin 4. For push-pull props and braces of up to Ø 58 mm.

Foot plate 48

Foot plate 48Zoom
galvanized, incl. head bolt 16/90 and cotter pin 4. Particularly sturdy foot plate for heavy-duty props of up to Ø 48 mm, e.g. Triplex R.

Double-jointed foot plate

Double-jointed foot plateZoom
galvanized, delivery includes head bolts 16/90 and cotter pin 4. It servers as foot plate for brace frames 250 and as connector for braces and push-pull props up to Ø 58 mm.

Foot plate 60

Foot plate 60Zoom
galvanized, incl. two (2) head bolts 16/90 with cotter pin 4. Double-jointed foot plate of SST-brace frame, can also be used to attach other braces and push-pull props up to Ø 58 mm. The foot plate can be bolted to any kind of job-built concrete block (ballast).

Head bolt 16/90

Head bolt 16/90Zoom
galvanized, to attach push-pull props or braces to foot plates and formwork-prop connectors.

Cotter pin D=4

Cotter pin D=4Zoom
galvanized, to lock the head bolt.
 
 
Termeni Tipărire
 © MEVA Schalungs-Systeme GmbH