Sisteme de cofraje
 

CaroFalt

 

Cofrajul pentru stâlpi

Pliabil, transportabil, rapid şi sigur

CaroFalt este un cofraj pentru stâlpi pliabil, transportabil, cu platformă de betonare, scări integrate de acces şi coşuri pentru protecţie spate. Cofrajul a fost elaborat în cooperare cu comisia de specialitate din domeniul construcţiilor şi respectă toate cerinţele de siguranţă cerute de sistem.

Cofrajul pentru stâlpi CaroFalt este alcătuit din patru panouri identice, care sunt asamblate articulat pe baza principiului de morişcă. Cofrajul se poate monta cu sau fără şipcă triunghiulară de colţ, astfel încât se pot realiza după preferinţe muchii ascuţite sau perfect teşite. Atingerea înălţimii de betonare în pas (modul) de 30 cm a celor două panouri de bază cu înălţime de 270 cm şi 360 cm se realizează prin panouri de completare, care sunt disponibile cu o înălţime de 60 cm şi 120 cm. În cazul acestei ajustări pe înălţime, se economiseşte timpul necesar montării şi demontării platformei de betonare şi a scării de acces, deoarece toate elementele odată montate rămân permanent la locul lor pe cofraj.

Rama

 CARACTERISTICI

AVANTAJE

  • ramă din profile închise, foarte durabile, din oţel
  1. rigiditate sporită la torsiune, durată de viaţă sporită
  • Profilele de ramă MEVA sunt prevăzute cu două straturi. Baza o constituie o grunduire neagră anticorozivă. O protecţie suplimentară împotriva coroziunii este asigurată prin conservarea spaţiului gol al ramei cu ceară. Stratul roşu dintr-un praf sintetic special este aplicat printr-o procedură de vopsire în câmp electrostatic, crescând astfel rezistenţa la zgârieturi şi lovituri a ramei.
  1. protecţie sporită anticorozivă
  2. necesitate redusă de curăţare, datorită aderenţei scăzute a betonului
  3. durată de viaţă sporită
 

Presiunea betonului

 CARACTERISTICI

AVANTAJE

  • rezistenţa admisibilă la presiune a betonului proaspăt (DIN 18218) pe toată suprafaţa: 100 kN/m²
  1. viteză mare de betonare şi la stâlpi foarte înalţi
  2. betonare până la înălţimea panoului, posibilă independent de reţeta de preparare a betonului, consistenţa betonului şi condiţiile meteorologice, indiferent de viteza de betonare
 

Construcţia

 CARACTERISTICI

AVANTAJE

  • patru panouri egale, îmbinate flexibil
  1. logistică simplă, componente egale
  • scară de acces integrată în sistem, coş pentru protecţie spate şi platformă de betonare
  1. realizarea uşoară a muchiilor ascuţite sau perfect teşite ale popilor
  • cu sipca triunghiulară sau bandă izolatoare pentru stâlpii cu muchii ascuţite
  1. realizarea uşoară a secţiunilor dreptunghiulare şi a secţiunilor pătrate
 

Înălţimi & dimensiuni

 CARACTERISTICI

AVANTAJE

  • riglă perforată în pas de 5 cm, pentru secţiuni de la 20 cm la 60 cm
  1. realizarea uşoară a secţiunilor dreptunghiulare şi a secţiunilor pătrate
  • panouri de bază cu înălţimea de 270 şi 360 cm; înălţare cu ajutorul elementelor cu înălţimi de 60 şi 120 cm 
  1. ajustare simplă la diferite înălţimi în pas de 30 cm, cu economie de timp de lucru
  2. nu este necesară mutarea platformei de betonare
 

Cofrare şi decofrare

CARACTERISTICI

AVANTAJE

  • îmbinarea dintre panourile de bază şi cele de înălţare se realizează cu cleştele de cofraj AS/ST
  1. sunt de ajuns câteva lovituri de ciocan pentru a obţine o îmbinare strânsă şi alinierea fără decalaje a panourilor
  • piesă de închidere şi bolţ cu siguranţă integrate
  1. închidere şi deschidere simple de pe scara de acces
  • roţi de transport integrabile
  1. transport rapid, economic, siguranţă sporită
 
 

CaroFalt column formwork

CaroFalt column formworkZoom
Construction height 12 cm, frame profile width 40 mm. The frames of the CaroFalt-panels are made of closed steel profiles and are torsion-proof, corrosion-resistant and easy to clean thanks to a state-of-the-art surface coating. CF-panels are standardly fitted with alkus AL 20 all-plastic forming face. AS-assembly locks guarantee a tight and perfectly aligned connection of stacked panels. Multi-function profiles allow for an easy, fast and safe attachment of accessories. Column sections from 20-60 cm can be adjusted in increments of 5 cm. The panels are assembled like a windmill and tied with CF-spanners across the corners.

CF-spanner

CF-spannerZoom
galvanized, to open and close the Caro-Falt. Required numbers: h = 360 cm: 6 pcs., h = 270 cm: 4 pcs., h = 120 cm: 2 pcs., h = 60 cm: 1 pc.

Flange screw 18

Flange screw 18Zoom
galvanized, with Dywidag thread Ø 15 mm. To attach accessories (e.g. brace frames, push-pull props, CF-brackets, ladder fixtures, etc.). Length of thread 18 cm.

AS-assembly lock

AS-assembly lockZoom
galvanized, to tightly connect and align CaroFalt-panels. Clamping length 8 cm. Two (2) AS-assembly locks are required per panel joint.

Chamfer strip 15/15

Chamfer strip 15/15Zoom
PVC, with perforated strip. Length 2.50 m.

Brace frame 250

Brace frame 250Zoom
galvanized, to align and brace the formwork. Available with or without formwork-prop connector, it consists of a push-pull prop R 250 (190-320 cm), a brace SRL 120 (90-150 cm) and a double-jointed footplate, the formwork-prop connectors are attached to the formwork with flange screws 18.

Formwork-prop connector

Formwork-prop connectorZoom
galvanized, to connect braces, brace frames and push-pull props (max. Ø 48 mm) to the multi-function profile by means of a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.

CF-access platform

CF-access platformZoom
access platform with pluggable guard-railing, galvanized steel frame covered with non-slipping aluminium. Load capacity 2 kN/m². It is attached to the CF-column panels by using a CF-scaffold bracket and a CF-cantilever angle.

CF-scaffold bracket

CF-scaffold bracketZoom
galvanized, is attached to the CF-column panel with a flange screw 18 and a CF-transport device 130 through the transport hole. The CF-access platform is attached with the integrated hammerhead screw.

CF-cantilever angle

CF-cantilever angleZoom
galvanized, is attached to the CF-column panel with a CF-transport device 130 through the transport hole. The CF-access platform is attached with the integrated hammerhead screw.

CF-front railing

CF-front railingZoom
galvanized, is attached to CF-access platform.

Ladder

LadderZoom
galvanized, is hooked into CF-platform and is automatically secured. It can be extended with extension ladders. Safety cages are required for operational safety.

Extension ladder 210

Extension ladder 210Zoom
galvanized, depending on height it is either hooked into the steps of the CF-ladder or bolted to the ladder by using the ladder connector. The extension ladder has to be secured with the CF-ladder fixture. Additional extension in increments of 30 cm by hooking an extension ladder into the appropriate step.

CF-ladder fixture

CF-ladder fixtureZoom
galvanized, is attached to a multifunction profile of CaroFalt with a flange screw 18. Two ladder fixtures are required for heights exceeding 3,60 m, three for heights exceeding 4,80 m.

CF-ladder connector

CF-ladder connectorZoom
galvanized, to connect the joint of two extension ladders without the need to hook one ladder into a step of the other.

Safety cage

Safety cageZoom
galvanized, internal diameter 70 cm. Protects the workers during ascending and descending. The safety cages are attached to the ladders or extension ladders with an integrated hammerhead screw.

CF-transport wheel

CF-transport wheelZoom
galvanized, hard rubber wheels with little rolling friction, for the horizontal transport of a closed column formwork. Load capacity 600 kg per wheel, spindle range 7,5 cm. Always four (4) wheels are required for a formwork unit. May be used up to a formwork height of 3,60 m.

CF-steel sheet for sliding

CF-steel sheet for slidingZoom
galvanized, to protect the alkus-sheet and the panel frames from damage when the formwork is opened or closed. It is attached to transport holes and secured with hinge pins. Four (4) steel sheets are required per column form (delivery includes hinge pins).

CF-transport device 130

CF-transport device 130Zoom
bolted, for the vertical transport of the column formwork to the next floor level. Load capacity 12 kN (1,2 tons). Always three (3) CF-transport devices are required per column form. Please refer to Instruction Manual for application and safety test.
 
 
 © MEVA Schalungs-Systeme GmbH